Got my pads, now for the rest

[critical_level2]

Today I got my pads ordered. I ordered 2 orange, 2 white and 2 blue, along with a 3.5 inch backing plate.

Now I need to get some polish and sealers/wax. I have a local body shop supply store and they carry the full Megs Professional line. I was thinking of getting the Megs #83 and #80. Then finishing it up with Megs #21v.2 or NXT.

This is my first time using my PC7424. I have some swirls to remove, but the paint is not super bad.. Does this sound like a good plan for polish and sealant/wax to begin with. Its the polish part that is throwing me for a loop, as there are soo many choices.

Any and all suggestions are appreciated.

Thanks.

[imported_Sludge]

I would try the Megs 80 on a white pad first. Honda Element paint is not too hard and 80 might be enough to fix it. If not you can go to the orange pad with 83, then follow with with a white pad and Megs 80. Megs 21 should put a nice finish on your orange paint. You don`t have too much paint to work with on an Element with plastic panels.

[critical_level2]

Thanks :dance