I need to remove a aftermarket rear wing(Ducktail) from a 06 Mustang. Its held on with double sided tape.Anyone have any tips for removal??
I need to remove a aftermarket rear wing(Ducktail) from a 06 Mustang. Its held on with double sided tape.Anyone have any tips for removal??
I have heard that to remove tape one uses fishing line and gently saws your way underneath the object that you want to remove. Not sure what to use to remove the remnanats of the two sided tape.
I`ve never looked at this so this is a real knee jerk response but if this is a factory wing I would be surprised if it is a tape only. They usually use tape and some type of mechanical fastener.
A society willing to trade liberty for temporary security deserves neither and will lose both
ΜΟΛΩΝ ΛΑΒΕ
I know that the last body style of Mustangs (99-04??) had 2 screws/bolts holdind the rear wings on. When people removed them they had to fill and then paint the holes...
However if it is just taped on there, a little bit of heat from a heat gun or hair dryer and fishing line should do the trick.
"Whether you think you can or think you can`t - you are right " -Henry Ford
Originally Posted by GearHead_1:wink:Originally Posted by Blackmagic1
I`d check underneath the trunk lid to see if you can see any nuts or bolts that might be holding it on. If it`s just tape, you should be able to remove it with fishing string and use goo gone and a plastic razor blade to get rid of whatever adhesive may be left over.
If you can read this, thank a teacher. If you can read this in English, thank a soldier.
Sorry bout` that, really I can read. Let`s see now, A F T E R M A R K E T, that spells factory. Yeah that`s right.
A society willing to trade liberty for temporary security deserves neither and will lose both
ΜΟΛΩΝ ΛΑΒΕ
Watch yer kneeOriginally Posted by GearHead_1
As my post said "Aftermarket Wing"...
:smile Thanks for the tips,time to dig out the fishing line !
This is your best bet. I would actually soak the area of the tape with the Goo Gone first and let it soak for a few minutes then proceed with the fishing line. The Goo Gone will also remove all residue and follow that with a good wipe down with Denatured Alcohol. Then wax and wax if your leaving it that way.Originally Posted by audiboy
Richard
1997 Ford F150 4x4 Pacific Green w/HOK Kandy Green Flames
2006 Mustang GT
1997 Ford F150 4x4 Pacific Green w/HOK Kandy Green Flames
2006 Mustang GT
You can resurrect any thread you wish to discuss but 97F1504x4 is correct, your avatar is not appropriate for DC. Try to keep it family friendly. Your avatar has been removed.
A society willing to trade liberty for temporary security deserves neither and will lose both
ΜΟΛΩΝ ΛΑΒΕ
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks